Crown CDi 4|600 DriveCore Analog 4-Channel 600-Watt Power Amplifier with BLU Link

Price: $2,875.00
(as of May 11,2023 03:47:42 UTC – Details)

From the manufacturer

Crown by Harman

Crown Audio is an industry leader in amplified sound. Crown makes amps for cinema venues, installed sites, touring rigs, portable PA and commercial audio. With over 67 years of focus on innovation and providing the best user experience, Crown Audio is continually raising the bar in audio amplification.

Crown DriveCore CDi 4|600BL

Analog Four-Channel 600W Power Amplifier with BLU Link

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. The CDi DriveCore 4|600BL offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more. The 4|600BL includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.

Each output channel is capable of providing either 70V or 100V for high Impedance applications Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port Through HARMAN’s HiQnet Audio Architect software, the CDi Drive Core can be controlled, configured, and monitored through standard TCP/IQ network Completely configure the amplifier using an intuitive front-panel interface On-board Digital Signal Processor in each amplifier allows for custom configuration GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/ AUX Port

Key Features

DriveCore Technology

Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design. Each output channel is capable of providing either 70V or 100V for high impedance applications.

Network Control and Monitoring

Through HARMAN’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network. Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link (BL models only). Pre-loaded speaker tunings allow for quicker and easier setup and installation. For customized configurations, On-board Digital Signal Processor (DSP) in each amplifier allows for complete control using an intuitive front-panel interface. You can also recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Extended 6 Year Coverage

This protects you for a specific period from your date of purchase as stated in your bill of sale or as otherwise established by Harman. The coverage period will be extended to 6 years. Except as otherwise stated in this policy, this covers defects in materials and workmanship if: (1) you purchased this product from a dealer that is a Harman Professional authorized dealer with respect to this product at the time of your purchase; (2) your original, dated bill of sale is presented whenever service is required during the period; and (3) unless Harman states otherwise, you purchased this product in brand new condition.

Product Type
DriveCore Analog 2-Channel 1200W Power Amplifier DriveCore Analog 2-Channel 1200W Power Amplifier with BLU Link DriveCore Analog 4-Channel 600W Power Amplifier DriveCore Analog 4-Channel 600W Power Amplifier with BLU Link DriveCore Analog 4-Channel 1200W Power Amplifier DriveCore Analog 4-Channel 1200W Power Amplifier with BLU Link

Frequency Response (8Ω, 20Hz – 20kHz)
+/-0.5dB +/-0.5dB +/-0.5dB ±0.25dB ±0.25dB ±0.25dB

Digital Signal Processing
96kHz, 32-bit floating point 96kHz, 32-bit floating point 96kHz, 32-bit floating point 96kHz, 32-bit floating point 96kHz, 32-bit floating point 96kHz, 32-bit floating point

Total Harmonic Distortion
0.35% 0.35% 0.35% 0.35% 0.35% 0.35%

BLU link Signal-to-Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz)
>108dB >108dB >108dB >108dB >108dB >108dB

Input Impedance (Nominally balanced, nominally unbalanced)
20 kΩ balanced, 10 kΩ unblanced 20 kΩ balanced, 10 kΩ unblanced 20 kΩ balanced, 10 kΩ unblanced 20 kΩ balanced, 10 kΩ unblanced 20 kΩ balanced, 10 kΩ unblanced 20 kΩ balanced, 10 kΩ unblanced

Cooling
Continuously variable speed forced air, front-to-back airflow Continuously variable speed forced air, front-to-back airflow Continuously variable speed forced air, front-to-back airflow Continuously variable speed forced air, front-to-back airflow Continuously variable speed forced air, front-to-back airflow Continuously variable speed forced air, front-to-back airflow

Power Supply Connector
15A IEC connector, 100 – 240V 15A IEC connector, 100 – 240V 15A IEC connector, 100 – 240V 15A IEC connector, 100 – 240V 15A IEC connector, 100 – 240V 15A IEC connector, 100 – 240V

Dimensions (H x W x D)
3.5” x 19” x 12.25” (8.9 cm x 48.3 cm x 31.12 cm) 3.5” x 19” x 14.71” (8.9 cm x 48.3 cm x 37.36 cm) 3.5” x 19” x 12.25” (8.9 cm x 48.3 cm x 31.12 cm) 3.5” x 19” x 12.25” (8.9 cm x 48.3 cm x 31.12 cm) 3.5” x 19” x 14.71” (8.9 cm x 48.3 cm x 37.36 cm) 3.5” x 19” x 14.71” (8.9 cm x 48.3 cm x 37.36 cm)

Weight
17.2 lbs (7.8 kg) 17.2 lbs (7.8 kg) 16.3 lbs (7.4 kg) 16.3 lbs (7.4 kg) 20.1 lbs (912 kg) 20.1 lbs (912 kg)

Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/aux port
Through HARMAN’s HiQnet audio Architect software, The CDI Drive Core can be controlled, configured, and monitored through standard TCP/IQ network
Completely configure the amplifier using an intuitive front-panel interface
Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio bus, BLU link