Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp
Price: $299.95
(as of May 05,2023 14:35:08 UTC – Details)
From the manufacturer
Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp
Features:
Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ AmpLCD displays volume in dB per channel and operating temperature1.5U rack spaceBuilt in limiter protects your speakers from distortion and clippingBridged mode allows you to combine both channels power into one channel for use with a subwooferStereo mode is perfect for (2) speakers or (4) speakers in a left and right configurationParallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configurationBuilt in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)Channel A & B Clipping Led IndicatorsChannel A & B Separate Level ControlsPower, signal, clipping, and protection LED indicators on front of ampHeavy duty rack mount ears with handlesBuilt-in variable high velocity quiet cooling fansMaximum headroom for 4-ohm and 8-ohm SpeakersLevel controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over loadUser serviceable fuse (20A, 250V)Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 KhzTHD + Noise @ 1Khz full power: <0.18%Input Impedance: 10K Ohm BalancedInput signal voltage: 640mV – 2.7VInput sensitivity: 0.7vDamping factor: ( 100Hz, 10w, 4 ohms): 44.1Damping factor: (1Khz @ 8 ohm): >400:1Effective damping factor (100Hz, 10w, 4 Ohms) 1.08Output impedance at speaker terminals: 0.0901 OhmsFrequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.09%Signal to Noise Ratio: > 100dBIMD 60Hz & 1kHz, 4:1: <0.04%SLEW RATE (input filter limited) : 28v/uSPower Requirements: 100V-240V / 50-60HzWeight: 9.9 lbsDimensions: 19.09 x 9 x 2.56 inches
Power Ratings:
RMS Power Output:
Stereo 8 Ohm: 2 x 700WStereo 4 Ohm: 2 x 1000WBridged 8 Ohm: 1 x 2000W
Peak Power Output:
Stereo 4 Ohm: 2 x 3500W MaxBridged 8 Ohm: 1 x 7000W Max
Terminals:
Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
Output Terminals:
Banana binding post speaker outputSpeakon outputXLR output to connect another amplifier or powered sub
Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles.
Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (20A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz. THD + Noise @ 1Khz full power: <0.18%. Input Impedance: 10K Ohm Balanced.
Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 700W. Stereo 4 Ohm: 2 x 1000W. Bridged 8 Ohm: 1 x 2000W. Peak Power Output: Stereo 4 Ohm: 2 x 3500W Max. Bridged 8 Ohm: 1 x 7000W Max.
Terminals: Input Terminals: Combo jack (XLR and ¼”) A & B inputs. Output Terminals: Banana binding post speaker output. Speakon output. XLR output to connect another amplifier or powered sub
