Soundavo PSB-200 Subwoofer Amplifier with Crossover/Phase Control – 200W
Price: $219.99
(as of Jul 21,2023 13:03:01 UTC – Details)
Product Description
The PSB-200 subwoofer amplifier delivers clean, solid power required to drive small-to-medium sized in-wall or floor stand style subwoofer speakers. Provide 200W RMS @ 4 Ohms (140W RMS @ 8 Ohms) of deep, hard-hitting high fidelity bass amplification and is tailored for home audio and home theater audio systems. Allows compensation for subwoofer location relative to the main speakers, can be adjusted from 0° to 180°. The Low Pass Filter from 35Hz to 160Hz. Unique solid and beautiful modern compact chassis exterior design for easy place on your music media stand/cabinet, fits anywhere you need it. The cool running light weight Class D amps are quiet and can run all night without over-heat issue. This subwoofer amp is an ideal match to our passive in-wall subwoofers. The PSB-200 is stable down to 4 ohms, so it will easily drive one or two subs. Use the front panel crossover and phase controls to dial in the sound just the way you want it.
High Efficient Class D Technology & Compact Design
Unique solid and beautiful modern compact chassis exterior design for easy place on your music media stand/cabinet, fits anywhere you need it. The cool running light weight Class D amps are quiet and can run all night without over-heat issue
Crossover Control
The Crossover sets the frequency at which audio content will pass to the PSB-200’s sub out, the range can be set from 35Hz to 160Hz
Phase Control
The Phase setting allows compensation for subwoofer location relative to the main speakers, adjust the phase setting to the point of highest sub audio out, the range can be set from 0 to 180 degrees.
RCA Input & Speaker Level Input/Output
Features a stereo/mono line level audio input that can receive full band audio from any audio amplifier, receiver or preamp, also features a stereo speaker level input/outputs connector will passthrough and unprocessed to a pair of connected speakers for easy to work with older amplifier/home theater receiver do not have line level outputs.
Features:
– 200 watts of deep, hard-hitting power at 4 ohms impedance
– Front panel volume, crossover, and phase controls to tailor your sound to your need
– Compact design fits anywhere you need it
– Cool running Class D amps are quiet and can run all night
– Audio-Sensing & 12VDC Trigger, Once the audio signal hits the PSB-200 line or speaker level inputs, the amp will instantly turn ON. The amp will also turn itself OFF after 5 minutes if no audio signal has been detected. There is also a 12VDC Trigger that will turn the PSB-200 ON when 12-24VDC is applied and turn the amp OFF when the voltage is removed.
Spec:
Maximum Power Output: 200W @4 Ohms, 140W @8 ohms
Frequency Response: 10Hz ~ 180 Hz +/- 1dB
Total Harmonic Distortion: < 1%
Signal to Noise Ratio: 95dB
Adjustable Low Pass Filter: 35Hz to 160Hz
Low-Pass Filter Slope: 12 db/oct
Phase Control: 0° to 180°
Power Handling per Channel @ 4 Ohms
200W(RMS) / 350W (Max) 250W(RMS) / 500W (Max) 400W(RMS) / 1000W(Max)
Power Handling per Channel @ 8 Ohms
140W(RMS) / 200W (Max) 150W(RMS) / 300W (Max) 200W(RMS) / 500W (Max)
Frequency Response
10Hz ~ 180 Hz +/- 1dB 35Hz ~ 180 Hz +/- 3dB 20Hz ~ 200 Hz +/- 1dB20Hz ~ 250Hz
Impedance
8 Ohm and 4 Ohm Stable 8 Ohm and 4 Ohms Stable 8 Ohm and 4 Ohm Stable
Adjustable Low-Pass Filter
35Hz to 160Hz 35Hz~180Hz 60Hz-150Hz
Auto-On Sensing
Yes Yes Yes
Trigger
Yes Yes Yes
Audio Line Out
No Yes Yes
✅【Adjustable Low Pass Filter & Phase Controls】Allows compensation for subwoofer location relative to the main speakers, can be adjusted from 0° to 180°. The Low Pass Filter from 35Hz to 160Hz.
✅【Easy Connection to Any System】Features a stereo/mono line level audio input that can receive full band audio from any audio amplifier, receiver or preamp or an LFE input, also features a stereo speaker level input/outputs connector and passthrough for easy to work with older amplifier/home theater receiver do not have line level outputs.
✅【High Efficient Class D Technology & Compact Design】Unique solid and beautiful modern compact chassis exterior design for easy place on your music media stand/cabinet, fits anywhere you need it. The cool running light weight Class D amps are quiet and can run all night without over-heat issue.
✅【Audio-Sensing & 12VDC Trigger】Once the audio signal hits the PSB-200 line or speaker level inputs, the amp will instantly turn ON. The amp will also turn itself OFF after 5 minutes if no audio signal has been detected. There is also a 12VDC Trigger that will turn the PSB-200 ON when 12-24VDC is applied and turn the amp OFF when the voltage is removed.
